Release Note 2016
Welcome to MIKE Zero Release 2016. In this Release Note you will find information about new features of MIKE Zero, and what you need to know in order to install and get started with Release 2016.
With MIKE Zero you have:
- MIKE 21 (release note)
- MIKE 3 (release note)
- LITPACK (release note)
- MIKE 11 (release note)
- MIKE SHE (release note)
- MIKE FLOOD (release note)
- MIKE HYDRO (release note)
MIKE Zero also include:
The recommended minimum system requirements are:
|Operating systems||Fully supported operating systems *
Windows 7 Professional Service Pack 1 (32 and 64 bit), Windows 8.1 Pro (64 bit), Windows 10 Pro (64 bit) and Windows Server 2012 R2 Standard (64 bit).
Non-supported but partially tested operating systems **
Windows 8.1 Pro (32 bit), Windows 10 Pro (32 bit) and Windows Server 2008 R2 Standard Service Pack 1 (64 bit).
Note that Release 2016 is the last release supporting 32 bit operating systems.
|Processor||x86 or x64, 2.2 GHz (or higher)|
|Memory (RAM)||2 GB (or higher)|
|Hard disk||40 GB (or higher)|
|Monitor||SVGA, resolution 1024x768 in 16 bit colour|
|Graphics adapter||64 MB RAM (256 MB RAM or higher recommended), 24 bit true colour|
|Software requirements||.NET Framework 3.5 SP1 and .NET Framework 4.0 (Full Profile)|
* Fully supported operating systems are systems that have been tested in accordance with MIKE's Quality Assurance procedures and where warranty and software maintenance agreement conditions apply.
** Non-supported but partially tested operating systems are systems, which are not officially supported by the MIKE software products. These operating systems have only undergone very limited testing for the purpose of MIKE software, but the software and key features are likely to work. Installation of MIKE software on a non-supported operating system is done so at the user's own risk. The MIKE software warranty and software maintenance agreement conditions do not apply for unsupported operating systems and DHI is under no obligation to provide assistance or troubleshooting for cases where the software is being used on a non-supported operating system.
Please note that single user installations are not allowed on server operating systems. Also, when running a fully supported operating system as a 'guest operating system' on a virtualisation platform, it is automatically downgraded to a non-supported operating system under the conditions provided above.
To install MIKE Zero, please choose MIKE Zero in the ‘MIKE Setup’ dialogue box that appears when inserting the MIKE 2016 USB and clicking the Setup.exe or executing the Setup.exe file from the downloaded installation files. Press the ‘Install’ button to begin installation.
The setup programme will automatically install all necessary files and folders on your computer.
To use MIKE Zero in licenced mode, please follow these steps:
- You can retrieve the MIKE software licence file (DhiLicense.dat) via the Internet. This requires a working Internet connection and a valid e-mail address. The licence file can be retrieved in two ways:
- During installation of the MIKE software
- After installation of the MIKE software, by launching the DHI License Updater through the Windows Start menu
Launch 'MIKE Zero' from the Windows Start menu.
Starting the programme without a DHI configured hardware key (dongle) and valid licence files will cause the programme to run in demo mode. If this happens, a message box will inform you during programme initialisation.
For general support, please see our FAQ.
If you experience any difficulties, or if you have any questions, you can contact Client Care by mail, e-mail, phone or fax:
Agern Allé 5
Tel: +45 4516 9333
Fax: +45 4516 9292
Or you can find your local Client Care with support in your local language here.