Release Note 2014

MIKE View

Introduction


Welcome to MIKE View Release 2014. In this Release Note you will find information about new features of MIKE View, and what you need to know in order to install and get started with Release 2014.

MIKE View is a stand-alone visualisation tool for numerical model results from a wide selection of water, stormwater, sewer and river modelling packages:

All these results can be displayed in combination with time series data imported from other sources - ASCII files, MOUSE and MIKE 11 time series databases, etc.

Data can be presented as for example.:

Animations of planplots, longitudinal profiles and time series are possible.


System requirements


The recommended minimum system requirements are:

Operating systems

Fully supported operating systems *
Windows 7 Professional Service Pack 1 (32 and 64 bit), Windows 8 Pro (64 bit) and Windows Server 2008 R2 Standard Service Pack 1 (64 bit). For the latest update, please refer to the FAQ.

Non-supported but partially tested operating systems **
Windows XP Professional Service Pack 3 (32 bit), Windows 8 Pro (32 bit) and Windows Server 2012 Standard (64 bit). For the latest update, please refer to the FAQ.
Processor 2.0 GHz Intel Pentium or higher and compatibles, or equivalents
Memory (RAM) 2 GB (or higher)
Hard disk 40 GB (or higher)
Monitor SVGA, resolution 1024x768 in 16 bit colour
Graphics adapter 64 MB RAM (256 MB RAM or higher recommended), 24 bit true colour
Media DVD drive compatible with dual-layer DVDs is required for installation
File system NTFS
Software requirements .NET Framework 3.5 SP1 and .NET Framework 4.0 (Full Profile)

* Fully supported operational systems are systems that have been tested in accordance with MIKE by DHI's Quality Assurance procedures and where warranty and software maintenance agreement conditions apply.

** Non-supported but partially tested operating systems are systems, which are not officially supported by the MIKE by DHI software products. These operating systems have only undergone very limited testing for the purpose of MIKE by DHI software, but the software and key features are likely to work. Installation of MIKE by DHI software on a non-supported operating system is done so at the user's own risk. The MIKE by DHI software warranty and software maintenance agreement conditions do not apply for unsupported operating systems and DHI is under no obligation to provide assistance or troubleshooting for cases where the software is being used on a non-supported operating system.

Please note that single user installations are not allowed on server operating systems. Also, when running a fully supported operating system as a 'guest operating system' on a virtualisation platform, it is automatically downgraded to a non-supported operating system under the conditions provided above.


Installation

^ top

To install MIKE View, please choose MIKE View in the ‘MIKE by DHI Setup’ dialogue box that appears when inserting the MIKE software 2014 DVD or executing the Setup.exe file from the downloaded installation files. Press the ‘Install’ button to begin installation.


Licence file & dongle

^ top

MIKE View is freeware and hence requires no dongle or licence file.


Product invocation

^ top

To start MIKE View, go to Start -> Programs -> MIKE by DHI 2014 -> MIKE View or search for MIKE by DHI 2014 and select MIKE View.


Support

^ top

For general support, please refer to our FAQ.

If you experience any difficulties, or if you have any questions, you can contact the Software Support Centre by mail, e-mail, phone or fax:

Software Support Centre
DHI
Agern Allé 5
DK-2970 Hørsholm
Denmark

mikebydhi@dhigroup.com
Tel: +45 4516 9333
Fax: +45 4516 9292

Or you can find your local support centre with support in your local language here.


New features

^ top

No new modules or features have been implemented in the 2014 release of MIKE View. Various corrections to known problems and inconsistencies in previous releases have been fixed.


Known defects & workarounds

^ top

No known defects


How to run MIKE View in other languages than English

^ top

In the MIKE View programme folder (where MIKE View is launched), you will also find a short cut to the MIKE View language switcher. This programme will allow you to change the language of the graphical user interface of MIKE View to a number of other languages than English. However, some languages, such as Russian require additional steps. Please refer to the FAQ for steps on how to do this.


Fixed issues

^ top

Release 2014 Service Pack 3

Please note that the service packs are accumulative, i.e. corrections and fixes released with a previous service pack are included in the newest service pack as well.

Module/type

Error/Inconvenience/New feature

Status

General No changes have been made for service pack 3 Unchanged
Release 2014 Service Pack 2

Please note that the service packs are accumulative, i.e. corrections and fixes released with a previous service pack are included in the newest service pack as well.

Module/type

Error/Inconvenience/New feature

Status

General No changes have been made for service pack 2 Unchanged
Release 2014 Service Pack 1

Module/type

Error/Inconvenience/New feature

Status

General Zoom to full extend doesn't work after Load Complete Layout
Fixed
MIKE 1D Presentation of FLOOD results of MIKE 1D incorrect
Fixed
MIKE URBAN Wrong units shown for Water Quality results files from MOUSE engine
Fixed
MIKE 11
  • Ensure that .ERF files can be loaded in MIKE View.
  • Export TFN
  • M11 User defined marks not displayed
Fixed

Release 2014

Module/type

Error/Inconvenience/New feature

Status

General Set default file type extension to previous loaded file type
Fixed
MIKE 1D Improve loading of .res1d files
Fixed
ECO Lab Data selection dialogue improved
Fixed
MIKE 11 Show results from incomplete simulation
Fixed
Statistics Improve statistics for large number of data points
Fixed

MIKE by DHI - Agern Allé 5 - DK-2970 Hørsholm, Denmark - Tel: +45 4516 9200, Fax: +45 4516 9292

mikebydhi@dhigroup.com - www.mikebydhi.com