Release Note 2014

MIKE SDK

Introduction


Welcome to MIKE SDK Release 2014. In this Release Note, you will find information about new features of MIKE SDK, and what you need to know in order to install and get started with Release 2014.


System requirements


The recommended minimum system requirements are:

Operating systems

Fully supported operating systems *
Windows 7 Professional Service Pack 1 (32 and 64 bit), Windows 8 Pro (64 bit) and Windows Server 2008 R2 Standard Service Pack 1 (64 bit). For the latest update, please refer to the FAQ.

Non-supported but partially tested operating systems **
Windows XP Professional Service Pack 3 (32 bit), Windows 8 Pro (32 bit) and Windows Server 2012 Standard (64 bit). For the latest update, please refer to the FAQ.
Processor 2.0 GHz Intel Pentium or higher and compatibles, or equivalents
Memory (RAM) 2 GB (or higher)
Hard disk 40 GB (or higher)
Monitor SVGA, resolution 1024x768 in 16 bit colour
Graphics adapter 64 MB RAM (256 MB RAM or higher recommended), 24 bit true colour
Media DVD drive compatible with dual-layer DVDs is required for installation
File system NTFS
Software requirements .NET Framework 3.5 SP1 and .NET Framework 4.0 (Full Profile)

* Fully supported operational systems are systems that have been tested in accordance with MIKE by DHI's Quality Assurance procedures and where warranty and software maintenance agreement conditions apply.

** Non-supported but partially tested operating systems are systems, which are not officially supported by the MIKE by DHI software products. These operating systems have only undergone very limited testing for the purpose of MIKE by DHI software, but the software and key features are likely to work. Installation of MIKE by DHI software on a non-supported operating system is done so at the user's own risk. The MIKE by DHI software warranty and software maintenance agreement conditions do not apply for unsupported operating systems and DHI is under no obligation to provide assistance or troubleshooting for cases where the software is being used on a non-supported operating system.

Please note that single user installations are not allowed on server operating systems. Also, when running a fully supported operating system as a 'guest operating system' on a virtualisation platform, it is automatically downgraded to a non-supported operating system under the conditions provided above.


Installation

^ top

To install MIKE SDK, please run the Setup.exe file and follow the on-screen instructions.


Licence file & dongle

^ top

MIKE SDK does not require a licence.


Product invocation

^ top

To start MIKE SDK, go to Start -> Programs -> MIKE by DHI 2014 -> MIKE Zero or search for MIKE by DHI 2014 and select ‘MIKE Zero’. Then you can select MIKE SDK from within the MIKE Zero Shell.


Support

^ top

For general support, please refer to our FAQ.

If you experience any difficulties, or if you have any questions, you can contact the Software Support Centre by mail, e-mail, phone or fax:

Software Support Centre
DHI
Agern Allé 5
DK-2970 Hørsholm
Denmark

mikebydhi@dhigroup.com
Tel: +45 4516 9333
Fax: +45 4516 9292

Or you can find your local support centre with support in your local language here.


New features

^ top

DFS file editing:


With the MIKE SDK, it is possible to read, write and edit dfs files programatically. Please refer to the documentation for more information.

PFS file editing:


The parameter file system, also known as pfs, may be accessed programatically using the SDK. Please refer to the documentation for more information.


Known defects & workarounds


^ top

Fixed issues

^ top

A service pack includes fixes to inconveniences and errors and minor modifications to the official release.
Please note that the service packs are accumulative, i.e. corrections and fixes released with a previous service pack are included in the newest service pack as well.

A service pack includes fixes to inconveniences and errors and minor modifications to the official release.
Please note that the service packs are accumulative, i.e. corrections and fixes released with a previous service pack are included in the newest service pack as well.

Release 2014 Service Pack 2

Module/type

Error/Inconvenience/New feature

Status

dfs writing After reading time-steps until end-of-file, writing (appending time steps) to file failed.
Fixed
dfsu writing When opening a dfsu file for appending using DfsFileFactory.DfsuFileOpenAppend, file pointer was set at first time step, overwriting first time steps instead of appending to file.
Fixed

Release 2014 Service Pack 1

Module/type

Error/Inconvenience/New feature

Status

No changes
Unchanged

MIKE by DHI - Agern Allé 5 - DK-2970 Hørsholm, Denmark - Tel: +45 4516 9200, Fax: +45 4516 9292

mikebydhi@dhigroup.com - www.mikebydhi.com